Konica Minolta Network Printer - Manual (Page 13)

Introduction 1-5
Introduction
Features Overview (continued)
• Repeat Image
Accepts the horizontal image area across the page, and repeats it down the page as many
times as the repeat width setting (10 ~ 150mm) permits, in manual or auto.
• Reverse Image
Reverses the image from black-on-white to white-on-black or vice versa.
• Sheet/Cover Insertion
Inserts up to 30 blank or printed sheets from any tray including the Multi-Sheet Bypass
Tray, or inserts blank or printed front and back covers from any tray including the Multi-
Sheet Bypass Tray.
• Stamp
Imprints a stamp onto the print image.
• Staple
Selects the stapling position and number of staples (3 positions).
• STD Size (Special)
Detects standard paper sizes which cannot normally be detected (A4R and A5) when
loaded in a main body tray. A5R and F4 sizes are detected when loaded in the Multi-sheet
bypass tray.
• Tab Paper
Prints onto tabbed sheets from tabbed data, allowing the image on the tab part of the
original to be printed on the same part of the tabbed print paper.
• Transparency Interleave
Prints onto transparency film and interleave blank or printed paper for each print data.
• Web Utilities
Manages the machine from PC over the internet.
• Weekly Timer
Can be set according to the needs of each work environment. Turns main body power Off/
On daily or weekly, during lunch time, on holidays, and also enables the Timer Interrupt
mode, which allows temporary use of the machine even when the machine is in the daily,
weekly, or holiday Off Mode.
HOME