Konica Minolta Network Printer - Manual (Page 130)

ECM (Electronic Copy Monitor) Function Setting [4] (continued)
9-14 Key Operator Mode
E.C.M. Data Edit [1] (continued)
Key Operator Mode
To Add ECM Data:
(1) Touch
Add on the ECM Data Edit Screen. The ECM Data Add Screen will be
displayed.
(2) Touch the desired item key to highlight it, then enter the data by using the touch screen
keypad.
Password: 8 digits max. (See note 1.)
Name: 8 characters max. (See note 2.)
Limit: 999,999 prints max.
NOTES: 1 We recommend that you make a list of all ECM passwords and account numbers.
2 If an invalid user name is entered, continue by entering the valid name.
(3) Touch OK to complete the setting and to verify whether the same password or name
has been already used for another account number.
When a password is duplicated:
The Password Duplication Screen will be displayed. Touch
YES to re-enter new
password, or NO to create duplicate password.
NOTE: If duplicate password is created, the number of copies will be counted only for the ECM password with
the smallest number. We recommend you do not use duplicate ECM passwords.
When a name is duplicated:
The Name Duplication Screen will be displayed. Touch
OK to enter new name.
To Delete ECM Data:
(1) Touch
▲ or ▼ key on the right side of the list to highlight the ECM data to be deleted,
then touch Delete . The Delete Confirmation Screen will be displayed.
(2) Touch YES to delete, or NO to cancel.
To Clear ECM Count:
(1) Touch
▲ or ▼ key on the right side of the list to highlight the desired ECM data, then
touch COUNT RESET . The Reset Confirmation Screen will be displayed.
(2) Touch YES to clear the print count of the selected ECM data, or NO to cancel.
Delete Confirmation Screen Reset Confirmation Screen
HOME