Konica Minolta Network Printer - Manual (Page 143)

Key Operator Mode 9-27
Key Operator Mode
Weekly Timer [9] (continued)
Timer Action On/Off Setting [3]
Use this function to set the On/Off condition of the printer for a given month. Set the On-Off
condition for specific days or collectively, for all Mondays through Sundays of the given
month. The default setting is collective: On for Mondays through Saturdays, and Off for
Sundays.
Weekly Timer Setting Menu Screen Timer Action On/Off Setting Screen
Timer Action Change Confirmation Screen
1 Press [ HELP ] to display the Help Screen, then touch Key Operator Mode .
Enter the 4-digit Key Operator password, then touch OK to display the Key Operator
Mode Screen. (See note 1.)
2 Touch [9] Weekly timer . Enter your 4-digit Weekly Timer master key code, then touch OK
to display the Weekly Timer Setting Menu Screen. (See note 2.)
NOTES: 1 If an invalid password is entered, enter the valid 4-digit password.
2 If an invalid Weekly Timer master key code is entered, continue by entering the valid 4-digit code.
3 Touch [3] Timer action ON/OFF setting to display the Timer Action On/Off Setting
Screen.
The days of the current month are displayed on the left half of the screen, with timer-
active days highlighted.
4 To activate or deactivate the Timer for any individual day, touch the key for that day to
change its indication.
To change the month, use arrows to scroll to the desired month.
5 To collectively set the on/off data for the entire month by the day of the week, touch the
ON or OFF key for the desired day on the right half of the screen. If you touch an
already-highlighted key, no change will occur.
HOME