Removing the dvd drive – Lenovo THINKSERVER 3821 User Manual
Page 195
If you have other devices to install or remove, do so now. Otherwise, go to
“Completing the installation” on page 233.
Removing the DVD drive
To remove the DVD drive
1 , do the following:
1. Read the safety information that begins on page 5.
2. Turn off the server and peripheral devices, and disconnect the power cords and
all external cables.
3. Unlock and remove the left-side cover (see “Removing the left-side cover” on
4. Disconnect the DVD drive cables from the back of the DVD drive.
5. Open the bezel (see “Opening the bezel” on page 150).
6. Grasping the blue tabs on each side of the DVD drive, press them inward while
you pull the drive out of the sever.
7. Remove the rails from the DVD drive and save them for future use.
8. If you are instructed to return the DVD drive, follow all packaging instructions,
and use any packaging materials for shipping that are supplied to you.
Chapter 7. Installing optional devices and replacing customer replaceable units
187