Lenovo THINKSERVER 3821 - Manual (Page 99)

User Aborted: You stopped the test before it was completed.
Not Applicable: You attempted to test a device that is not present in the server.
Aborted: The test could not proceed because of the server configuration.
Warning: The test could not be run. There was no failure of the hardware that was
being tested, but there might be a hardware failure elsewhere, or another problem
prevented the test from running; for example, there might be a configuration
problem, or the hardware might be missing or is not being recognized.
The result is followed by an error code or other additional information about the
error.
Viewing the test log
To view the DSA log when the tests are completed, select Utility from the top of the
screen and then select View Test Log. To view a detailed test log, press Tab while
you view the DSA log. The DSA log data is maintained only while you are running
the diagnostic programs. When you exit from the diagnostic programs, the DSA log
is cleared.
To save the DSA log to a file on a diskette or to the hard disk, click Save Log on
the diagnostic programs screen and specify a location and name for the saved log
file.
Notes:
1. To create and use a diskette, you must add an optional external diskette drive to
the server.
2. To save the test log to a diskette, you must use a diskette that you have
formatted yourself; this function does not work with preformatted diskettes. If the
diskette has sufficient space for the test log, the diskette can contain other data.
Diagnostic messages
The following table describes the messages that the diagnostic programs might
generate and suggested actions to correct the detected problems. Follow the
suggested actions in the order in which they are listed in the column.
Table 4. DSA messages
v Follow the suggested actions in the order in which they are listed in the Action column until the problem is solved.
v See Chapter 8, “Parts Listing, TD200x Machine Types 3719, 3821, 3822, and 3823,” on page 237 to determine which
components are customer replaceable units (CRU) and which components are field replaceable units (FRU).
v If an action step is preceded by “(Trained service technician only),” that step must be performed only by a Trained
service technician.
Message
number
Component Test State Description Action
089-000-xxx CPU CPU Stress
test Pass CPU passed
stress test No action required.
Chapter 5. Diagnostics 91