Installing a 2.5-inch hot-swap hard disk drive – Lenovo THINKSERVER 3821 User Manual
Page 204
3. Press down on the release latch to open the drive handle; then, pull the drive
out of the drive bay.
4. If you are instructed to return the hot-swap hard disk drive, follow all packaging
instructions, and use any packaging materials for shipping that are supplied to
you.
Installing a 2.5-inch hot-swap hard disk drive
The following notes describe the types of hard disk drives that the server supports
and other information that you must consider when you install a hard disk drive:
v
Depending on the model, the server supports up to eight or up to 16 2.5-inch
SAS hot-swap hard disk drives in the hot-swap bays.
v
The hot-swap bays are arranged horizontally in the top and bottom hard disk
drive cages:
– On models with eight hard disk drives, the top bays are numbered 0 through 7
(from right to left)
– On models with 16 hard disk drives, the top bays are numbered 0 through 7
(from right to left) and the bottom bays are 8 through 15 (from right to left)
0
Bay 0
8
Bay 8
1
Bay 1
9
Bay 9
2
Bay 2
10
Bay 10
3
Bay 3
11
Bay 11
4
Bay 4
12
Bay 12
5
Bay 5
13
Bay 13
6
Bay 6
14
Bay 14
7
Bay 7
15
Bay 15
v
For a list of supported optional devices for the server, see
v
Inspect the drive and drive bay for signs of damage.
196
ThinkServer TD200x Types 3719, 3821, 3822, and 3823: Hardware Maintenance Manual