Lanier DIGITAL COLOR PRINTER/COPIER 5722 - Manual (Page 131)

126
3. SORT OR SORT/STAPLE COPYING (Cont.)
6 Pressing the STAPLE key will cause
the copies in each bin to be stapled
automatically.
● While stapling is in progress, if you press the
STAPLE key again, stapling will stop.
Pressing the key again will resume stapling.
● The STAPLE
key lamp comes on only
when stapling is possible. However, if the
maximum number of copies that can be
stapled is exceeded, the STAPLE key
lamp goes out, alerting the operator that
stapling is not possible.
Placing the original on the glass:
● After the copying of the first original (last
page) finishes, place the next original and
press the START key.
● Repeat this step until all the originals finish
being copied.
Note: Do not open the stapler cover during
stapling in order to avoid a staple jam.
5 Press the START key.
Using the automatic document feeder:
● The originals placed on the original feed tray
will automatically be fed in one by one.
● If the sort/stapling mode is selected, all the
sets of copies will automatically be stapled
after copying is finished.
● If the copier stops during the sort or sort/
stapling mode and displays
Remove paper from sorter bins ,
remove all the copies from the sorter and
press the START key again to continue. In this
case, stapling is not possible.