Lanier DIGITAL COLOR PRINTER/COPIER 5722 - Manual (Page 18)

15
DESCRIPTION OF THE DIGITAL COPIER
q CHECK ORIGINAL symbol
This symbol flashes when an original is misfed
inside the automatic document feeder.
w BYPASS MISFEED symbol
This symbol flashes when no paper is fed into
the copier in bypass copying. Remove and
reset the sheets on the sheet bypass.
e ADD TONER symbol
This symbol flashes when the toner supply in
the cartridge runs out.
r CLEAR PAPER symbol
This symbol flashes when paper is misfed on
the paper path inside the copier.
t CLEAR PAPER symbol
This symbol flashes when a sheet of paper fed
from the large-capacity feeder is misfed in the
paper feed section.
y CLEAR PAPER symbol
This symbol flashes when a sheet of paper fed
from the selected cassette is misfed in the paper
feeding section.
u STACK symbol
This symbol flashes when sheets of paper copied
on one side are stacked in the duplexer. This
symbol also flashes when sheets of paper are
left in the duplexer. In this case, remove paper
from the duplexer.
i CLEAR PAPER symbol
This symbol flashes when paper is misfed
in the automatic duplexer.
o CLEAR PAPER symbol
This symbol flashes when paper is misfed
on the transfer belt.
!0 REPLACE TONER BAG symbol
This symbol flashes when the toner bag
becomes full of used toner.
!1 CLEAR PAPER symbol
This symbol flashes when paper is misfed
in the fuser unit.
!2 SORTER MISFEED symbol
This symbol flashes when paper is misfed
in the optional sorter.
!3 CALL SERVICE symbol
This symbol flashes when maintenance
by a service technician is necessary.
The graphic display shows the status of the copier. When one of the graphic symbols flashes, take
the appropriate action referring to the page shown.
5. DESCRIPTION OF THE GRAPHIC DISPLAY
!3
!2
!1
!0
o i u
y
q
w
e
r
t