Lanier DIGITAL COLOR PRINTER/COPIER 5722 - Manual (Page 22)

19
HOW TO MAKE COPIES
To make copies with a fine image, use of the following sheets is recommended.
If you use copy paper other than the recommended types, ask your service technician.
Paper Type Toshiba Recommendations / Manufacturer Size Mode
Plain Paper Laser Print (24 lb. bond) / Hammermill LD,LG,LT PLAIN
Color Copy Paper (28 lb. bond) / Hammermill
LD,LG,LT THICK 1
Laser Print (28 lb. bond) / Hammermill
Thick Paper Laser Print (32 lb. bond) / Hammermill LD,LG,LT THICK 2
Index Plus (90 lb. index) / Springhill LD,LG,LT THICK 3
Index Plus (110 lb. index) / Springhill LD,LG,LT THICK 3
Labels 5165 / Avery LT THICK 2
OHP Film CG3700 / 3M
LT (125
µ
m) OHP FILM
BG78 / Folox
* Be sure to use OHP films specified by Toshiba only.
Using other types of OHP films may result in the failure of the copier.
Instructions before use
• Using paper with a special process on the surface, paper printed by another copier, or making
a copy on the paper surface that has already been copied once may cause poor copy quality.
• Do not use creased, folded, wrinkled, curled, slippery or stiff paper which may cause paper jams.
• Keep the copy paper wrapped. Do not expose it to high humidity after taking the copy paper
out of the wrapping paper.
• In case you want to use paper other than that listed above, ask your service technician
Recommended Paper