Lanier DIGITAL COLOR PRINTER/COPIER 5722 - Manual (Page 93)

90
5
7
Following the “Specifying an area” on page
84, key in the size of the area to be centered
with the digital keys, then press the SET
key.
Select the desired copy size, image density
level, copy quantity, etc. if necessary.
6 Place the original on the glass face down
and with its bottom toward you and with
its top left aligned against the original
scale on the left side.
When Centering the Entire Image of an Original
4 Place the original on the glass face down
with its bottom toward you and with its
top left aligned against the original scale
on the left side.
6 Press the START key.
When Centering a Part of an Original
4 Place the original on the glass face up with
its bottom toward you and with its top left
aligned against the original scale on the
left side.
8
Press the START key.
5 Press the BASIC key to return to the Basic
menu, then select the desired copy size,
image density level, copy quantity, etc. if
necessary.
Tip: If the setting of original size and copy size
is not appropriate, the image may not be
copied completely.
Tip: If the setting of original size and copy
size is not appropriate, the image may
not be copied completely.
12. CENTERING (Cont.)