Lanier DIGITAL COLOR PRINTER/COPIER 5722 - Manual (Page 44)

41
HOW TO MAKE COPIES
10. BYPASS COPYING (THICK PAPER/OHP FILM)
Bypass Copy Mode
Bypass copying is convenient when the size of any paper cassettes installed in the copier is
not the size you require or when you want to use special sizes of paper such as Full Bleed
(12"X18") or special types of paper such as thick paper and OHP films(transparency) or sticker
labels.
● This copier has bypass copy modes corresponding to paper types.
Refer to the table below and select the mode corresponding to the sheets. Otherwise, it
may cause paper jams or lower the image quality.
● The number of sheets that can be set at a time differs depending on paper type.
Setting more than specified number of sheets at a time may cause copier failure or paper
jams. Be sure to set within the specified range.
● The range of acceptable paper sizes is from Full Bleed to Statement-R.
Bypass Copy Mode Corresponding Paper Type Maximum Capacity
PLAIN
Plain paper (17-22 lb.) approx.50 sheets
Plain paper (23-24 lb.) approx.40 sheets
12"X18" *Full Bleed (17-28 lb.) approx.30 sheets
OHP FILM OHP films approx.20 sheets
THICK 1 Thick paper (25-28 lb.) approx.30 sheets
THICK 2 Thick paper (29-37 lb.) 1 sheet
THICK 3
Thick paper (38-110 lb. index)
1 sheet
Thick sticker labels
*Full Bleed = 12"X18"