Lanier DIGITAL COLOR PRINTER/COPIER 5722 - Manual (Page 75)

72
Set the desired image density level,copy
quantity, etc.
5
6
Note: For automatic stapling in the 2 in 1 mode,
the stapling position is the right bottom
corner rather than the normal left upper
corner of the copy, as shown on the right.
If you want to staple on the left upper
corner, change the direction and use the
manual stapling mode (see page 127).
Normal stapling position
Stapling position in 2 in 1
(right bottom corner)
6. 2 IN 1 MODE COPYING (Cont.)
Press the START key.
Enter the number of the originals.
● Use the digital keys to enter the number
of your originals or press the Original
Count key.
3
Tip: To have copies arranged in the correct page
order in 2 in 1 copying, it is necessary to let
the copier know the number of originals in
one of the following ways:
● When making the copier count the number
of originals:
→
Press the Original Count key.
● When the operator knows the number of
originals:
→
Key in the number of the originals.
4
● When you press the Original Count key,
the copier starts counting the originals
automatically. When it finishes counting
them, this message appears:
Put originals in doc. feeder
Then reset the originals in the original feed tray
in the same way as described in step 1.
Press the SET key.