Lanier DIGITAL COLOR PRINTER/COPIER 5722 - Manual (Page 23)

20
Auto Job Start Mode
The energy-saving function is to save the power consumption by lowering the fuser
temperature while the copier is not being used.
There are two levels for this function.
Forcibly Switching to Energy-saving mode
2. ENERGY-SAVING FUNCTION
Time to return
approx.5 min. 30 sec.
approx.2 min. 30 sec.
Energy saving
efficiency
approx.50% (142W)
approx.20% (227W) Level 1
Level 2
*Power consumption during normal standby : approx. 284W
● Level 1 is set as the default mode. You can switch the initial mode depending on user's environment
(see page 119).
Press the ENERGY SAVER key on the
control panel to forcibly switch to the
energy-saving mode. (see page 10)
Canceling the Energy-saving mode
Press the ENERGY SAVER key on the
control panel.
The Energy-saving lamp goes off and the
copier starts warming up again (see page 10).
See the table above for the time to return.
  


AUTO COLOR
TIMER
SETTINGS
ENERGY
SAVER
INTERRUPT
BLACK FULL COLOR
HELP