LSI 7202CP - Manual (Page 23)

BIOS Features 3-5
Copyright © 2001, 2002 by LSI Logic Corporation. All rights reserved.
3.1.3.5 Boot Adapter List Menu
The Boot Adapter List menu specifies the order in which adapters boot
when more than one LSI Logic host adapter is in a system. You can
select up to four of the total adapters in a system as bootable; however,
you can use only one of the four “active” adapters to control a Boot
Volume.
To select this menu:
1. Press F2 while on the Main menu to move the cursor to the menu
area.
2. Move the cursor to Boot Adapter List with the arrow keys.
3. Press Enter .
You can add or delete adapters using this menu. To add an adapter to
the boot list, press the
Insert key while on the Boot Adapter List. Use
the arrow keys to select the desired adapter and press Enter to add it
to the end of the Boot Adapter List.
To remove an adapter from the boot list, press the Delete key while on
the desired adapter in the Boot Adapter List. You can also change the
boot order by using the “+” or “
− ” keys. For example, place the cursor on
the adapter that you want to change, and use the “+” or “
−
” key to raise
or lower the boot order.
3.1.3.6 Global Properties Menu
The Global Properties menu allows you to pause if an alert message has
been displayed, to view display boot information, and to set display and
video modes.
3.1.4 Exiting the Intel BIOS Configuration Utility
The Exit menu for the Intel BIOS Configuration Utility is used for all five
of the menus listed above. However, the available functionality is different
for the Main menu and the four subordinate menus.