LSI 7202CP - Manual (Page 24)

3-6 BIOS Features
Copyright © 2001, 2002 by LSI Logic Corporation. All rights reserved.
To exit from the Adapter Properties, Device Properties, Boot Adapter List,
or Global Properties menus, use these exit options:
To exit from the Main menu, use these exit options:
Important: If you reboot the system without properly exiting from this
utility, some changes may not take effect.
3.1.5 Fcode
LSI Logic Solaris-capable Fusion-MPT host adapters have Fcode
resident on board, allowing operation under Sun’s openboot console. All
basic functionality is available at openboot, including the ability to display
devices connected to the adapter, and boot devices on the adapter.
3.1.5.1 Fcode Features
The LSI Logic FC Fcode features support for:
•
Solaris Sparc 2.6, 2.7, and Solaris 8 Open Firmware environments
•
Root Boot device selection from any target device
•
Standard command line interface, with help query
•
Configuration options and selection for each host adapter
3.1.5.2 Identifying the Fibre Channel Disks
The probe-scsi-all command is used to identify the Fibre Channel
devices on the Fusion-MPT adapter.
Cancel exit This option returns you to the previous menu.
Save changes then
exit this menu This option implements any changes you made on the
previous menu and returns you to the Main menu.
Discard changes
then exit this menu This option restores the default settings and returns
you to the Main menu.
Cancel exit This returns you to the Main menu.
Exit the Configuration
Utility This option exits the configuration and automatically
reboots your system.