LSI 7202CP User Manual
Page 25
BIOS Features
3-7
Copyright © 2001, 2002 by LSI Logic Corporation. All rights reserved.
To show all disks available from the openboot prompt, use the
probe-
scsi-all
command. Note that this command is used whether the disks
are Fibre Channel or SCSI; all disks available on all Fusion-MPT devices
are displayed.
ok probe-scsi-all
/pci@8,600000/SUNW,qlc@4
LiD HA LUN ---Port WWN--- ----Disk description----
1 1 0 2100002037e4d65b SEAGATE ST318304FSUN18G 0726
/pci@8,700000/IntraServer-Ultra160,scsi@3,1
/pci@8,700000/IntraServer-Ultra160,scsi@3
Target 0
Unit 0
Disk
IBM
DDRS-34560D
DC1B
/pci@8,700000/IntraServer,fc@2
MPT Version 1.00, Firmware Version 1.02.00
Target 0
Unit 0
Disk
SEAGATE ST39173FC
6615
WWN 2100002037109d76 Port ID d9
Target 1
Unit 0
Disk
SEAGATE ST39173FC
6258
WWN 210000203710565a Port ID 17
Target 2
Unit 0
Disk
SEAGATE ST39173FC
6258
WWN 2100002037105212 Port ID 1
Target 3
Unit 0
Disk
SEAGATE ST39173FC
6258
WWN 2100002037103da8 Port ID 26
Target 4
Unit 0
Disk
SEAGATE ST39173FC
6258
WWN 210000203710324a Port ID 73
/pci@8,700000/scsi@6
Target 6
Unit 0 Removable Read Only device PLEXTOR CD-ROM PX-20TS
If the Fibre Channel devices on your LSI Logic adapter are not identified
by your system, check the following:
1.
Is the Fibre Channel enclosure powered ON?