LSI 7202CP - Manual (Page 38)

4-6 Solaris Software Requirements
Copyright © 2001, 2002 by LSI Logic Corporation. All rights reserved.
Figure 4.2 Completing Floppy Disk Installation
Step 3. The itmpt device driver is now installed. Reboot the machine to
reconfigure the system and to recognize the new devices.
Distribution File Install – If you received the drivers in an
itmpt_install.tar.Z file, follow these steps:
Step 1. Uncompress and untar the itmpt_install.tar.Z file by typing the
following commands to create a directory named install:
uncompress itmpt_install.tar.Z
tar -xvf itmpt_install.tar
cd install
Step 2. Execute the pkgadd process as described in the previous
section to add the itmpt driver to the operating system:
Note: If you change the disk drive configuration of your machine,
it may be necessary to issue the command:
touch /reconfigure
and then reboot the system to allow the system to detect
and correctly install your new disks.
This package contains scripts which will be executed with
superuser permission during the process of installing this
package.
Do you want to continue with the installation of <ITImpt>
[y,n,?] y
Installing LSI Logic/IntraServer FusionMPT(tm)
Fibrechannel/SCSI drivers as <ITImpt>
## Installing part 1 of 1.
/kernel/drv/itmpt
/kernel/drv/itmpt.conf
[ verifying class <none> ]
## Executing postinstall script.
installing /kernel/drv/sparcv9/itmpt
Installation of <ITImpt> was successful.