LSI 7202CP - Manual (Page 32)

3-14 BIOS Features
Copyright © 2001, 2002 by LSI Logic Corporation. All rights reserved.
ok 1 clear-persistent
Entry 1 has been cleared
ok show-persistent
ok
Entry 1 has been deleted from the table, and the table is now empty.
3.2 Troubleshooting
The LSI Logic Intel BIOS Configuration Utility is a powerful tool. If, while
using it, you somehow disable all of your controllers, pressing
Ctrl-A or
Ctrl-E after memory initialization during reboot allows you to re-enable
and reconfigure.
These messages may appear during the boot process:
•
Adapter removed from boot order, parameters will be
updated accordingly! appears when an adapter is removed from
the system or relocated behind a PCI bridge. This message is for
information only, and no further user action is required.
•
Configuration data invalid, saving default configuration!
appears if none of the information in NonVolatile Random Access
Memory (NVRAM) is valid. This message is for information only, and
can occur when the BIOS is upgraded or when some external event
has rendered the NVRAM temporarily unreadable.
•
Found FC Controller not in following Boot Order List, to
Add: Press Ctrl-C to start LSI Logic Configuration
Utility... appears when fewer than four adapters are in the boot
order and adapters exist in the system which are not in the boot
order. This message is for information only, and indicates that more
than four adapters exist in the system. The additional adapters will
not be managed by the Configuration Utility.