LG Network Attached Storage with built-in Blu-ray Rewriter N4B1 - Manual (Page 59)

. LG NAS Web Menu Use (for LG NAS administrators)

② If ‘Manual IP Setting’ above has been checked, fill in the IP address, Subnet mask,
default gateway and DNS address.
∙ IP address: Enter desired IP address.
∙ Subnet Mask: Enter the subnet mask that suits the current network environment.
∙ Default Gateway: Define the outgoing route. If no gateway exists on the
network, enter the IP address.
∙ Default DNS server address: The DNS handles conversions between domain
names and IP addresses. If the DNS is not correctly configured, e-mails, DDNSs
or domains will not function normally.
∙ Secondary DNS server address: Enter the secondary DNS server address.
* If accurate values are unknown, please contact ISP or network administrator.
③ Configure ethernet frame size. If frame size is unknown, set it to 1500.
* Ethernet Frame Size: If the Ethernet frame size is at least 1500 gigabits, specified
files can be sent quickly and with ease. In this case, the LG NAS alone does
not change, but so do the PC and home router/router/hub/switch frame sizes.
Otherwise performance will be reduced.