LG Network Attached Storage with built-in Blu-ray Rewriter N4B1 - Manual (Page 69)

. LG NAS Web Menu Use (for LG NAS administrators)

Hibernation Setup
When the volumes of LG NAS have not been accessed for a given amount of time, all
the LG NAS hard disks will enter standby mode and minimize consumption of electricity.
In this hibernation state, accessing volumes will cause the LG NAS’s HDD to wake up
gradually, taking approximately 3 - 15 seconds.
① Click on the ‘Edit’ button to configure hibernation.
② Check ‘Enable’ to activate hibernation mode, or ‘Disable’ to deactivate. When
selecting ‘Enable’, proceed to the next step.
③ Set wait time.
If there is no data traffic during the given time, the LG NAS will enter hibernation
mode. Time can be set to 10/30/60/120 minutes.
④ Click on the ‘Apply’ button to dictate changes to the LG NAS. Click on the ‘Cancel’
button to discard changes.