Lexmark 8300 Series - Manual (Page 114)

7 Press or to select one of the following: Touch Tone , Pulse , or Behind a PBX .
8 Press .
9 Press .
Printer receives a blank fax
Ask the sender to verify the original document was loaded correctly.
Check the ink levels, and install a new cartridge if necessary.
1 Remove the print cartridges.
2 Make sure the sticker and tape have been removed.
1
2
3 Reinsert the print cartridges.
Received fax has poor print quality
Ask that the sender:
• Check that the quality of the original document is satisfactory.
• Resend the fax. There may have been a problem with the quality of the telephone line connection.
• Increase the fax scan resolution.
Change the fax quality setting:
1 Press Fax Mode.
2 Press .
3 Press or repeatedly until Quality is selected.
4 Press or repeatedly to select a higher fax quality.
5 Press .
6 Press .
114