Lexmark 8300 Series - Manual (Page 23)

Use the To
5 LINE port
LINE
Connect the printer to an active telephone line
to send and receive faxes. The printer must be
connected to this telephone line to receive
incoming fax calls.
Note: Do not connect additional devices to the
LINE port, and do not connect a DSL (digital
subscriber line), ISDN (integrated services
digital network), or cable modem to the printer.
Using the control panel
The display shows:
• All-In-One status
• Messages
• Menus
1
6 7 8
2
3
4
5
Press To
1 Quick Dial buttons
(1–5) Access any of the five programmed Speed Dial numbers.
2 Copy Mode Access the copy menus and make copies.
Note: The mode is selected when the button light is on.
3 Scan Mode Access the scan menus and scan documents.
Note: The mode is selected when the button light is on.
4 Fax Mode Access the fax menus and send faxes.
Note: The mode is selected when the button light is on.
5 Photo Card Access the photo card menus. You can preview photos stored on a memory
card or flash drive, edit the photos, and print them.
23