Lexmark 8300 Series - Manual (Page 130)

Using this product in Switzerland
This product requires a Swiss billing tone filter (Lexmark part number 14B5109) to be installed on any line
which receives metering pulses in Switzerland. The Lexmark filter must be used, as metering pulses are
present on all analog telephone lines in Switzerland.
Power consumption
ENERGY STAR
The EPA ENERGY STAR Office Equipment program is a partnership effort with office equipment
manufacturers to promote the introduction of energy-efficient products and to reduce air pollution caused
by power generation.
Companies participating in this program introduce products that power down when they are not being
used. This feature will cut the energy used by up to 50 percent. Lexmark is proud to be a participant in
this program.
As an ENERGY STAR Partner, Lexmark International, Inc. has determined that this product meets the
ENERGY STAR guidelines for energy efficiency.
Product power consumption
The following table documents the power consumption characteristics of the product.
Mode Description Power consumption
Printing Product is generating hard copy output 17.0 W
Copying Product is generating hard copy output from hard copy originals 15.0 W
Scanning Product is scanning hard copy documents 14.0 W
Ready Product is waiting for a print job 7.5 W
Power Saver Product is in energy saving mode 7.5 W
Off Product is plugged into a wall outlet, but switch is turned off 6.5 W
The power consumption levels listed in the previous table represent time-averaged measurements.
Instantaneous power draws may be substantially higher than the average.
130