Lexmark 8300 Series - Manual (Page 45)

Load up to Make sure
25 sheets of labels • You use full label sheets. Partial sheets (with areas exposed
by missing labels) may cause labels to peel off during
printing, resulting in a paper jam.
• The print side of the labels faces down.
• The top of the labels feeds into the printer first.
• The paper guides rest against the left, right, and bottom
edges of the label sheets.
50 transparencies • The rough side of the transparencies faces down.
• You remove any paper backing sheets from the
transparencies before loading.
• If the transparencies have a removable strip, each strip faces
down toward the paper tray.
• The paper guides rest against the left, right, and bottom
edges of the transparencies.
Note: Transparencies require more drying time. Remove each
transparency as it exits, and allow it to dry to avoid ink smudging.
100 sheets of custom size paper • The print side of the paper faces down.
• The paper size fits within these dimensions:
Width:
– 76–216 mm
– 3.0–8.5 inches
Length:
– 127–432 mm
– 5.0–17.0 inches
• The paper guides rest against the left, right, and bottom
edges of the paper.
45