Panasonic KW-WP1050E - Manual (Page 153)

Base Unit Settings
Helpline Tel. No.: U.K. 0844 844 3898 153
MAC Address Clone:
This feature allows you to clone the MAC (Media Access Control) address of your
computer’s network adaptor onto this product.
A MAC address is a 12-digit code assigned to a unique piece of hardware for identification.
Some Internet service providers require that you register the MAC address of your
computer’s network adaptor, which was connected to your cable or DSL modem during
installation.
In such cases, you will need to re-register the MAC address of the base unit with the
Internet service provider, but you can avoid re-registering the MAC address by using this
feature. You can copy the MAC address of your computer’s network adaptor to the base
unit and use its address for the Internet connection.
1
Click [Advanced Setup] on the Top Menu.
2
Click the [Basic] tab, then click [MAC Address Clone].
Note:
L
This feature is not available in AP (Bridge) mode.
WP1050E.book Page 153 Thursday, March 29, 2007 11:31 AM