Panasonic KW-WP1050E - Manual (Page 61)

Getting Started
Helpline Tel. No.: U.K. 0844 844 3898 61
Battery charge
Connect the included charge cable to the CHARGE port of the handset. Connect the other
end to the CHARGE port of the base unit that is connected to the power supply.
Charge the battery for 6 hours before initial use.
L
While charging, the charge indicator on the handset lights in red. When the battery is
fully charged, the indicator goes out.
L
You can use the included handset stand while charging the battery. To use the stand,
align the grooves of the handset with the tabs of the stand and insert.
Note:
L If you want to use the handset immediately, charge the battery for at least 15 minutes.
L
You can use the handset while charging the battery. However, we recommend you wait
for the handset to be charged to the full level before using the handset.
To AC outlet
CHARGE ports
Charge cable
Charge indicator
Handset stand
WP1050E.book Page 61 Thursday, March 29, 2007 11:31 AM