Panasonic KW-WP1050E - Manual (Page 161)

Base Unit Settings
Helpline Tel. No.: U.K. 0844 844 3898 161
L
This feature is not available in AP (Bridge) mode.
DMZ:
This feature allows you to configure the DMZ (DeMilitarised Zone) settings. Enable DMZ
to expose a specified computer on your LAN to the Internet.
Important:
L
A computer specified as the DMZ host may be vulnerable to security risks.
1
Click [Advanced Setup] on the Top Menu.
2
Click the [Advanced] tab, then click [DMZ].
3
Configure the settings, then click [Save].
4
Click [Restart].
L
The base unit automatically restarts and the Top Menu is displayed.
Note:
L
This feature is not available in AP (Bridge) mode.
Setting Description
[DMZ]
L
Select whether to enable or disable the DMZ feature.
[DMZ Host IP
Address]
L
Enter the IP address of the computer to be exposed to the
Internet.
WP1050E.book Page 161 Thursday, March 29, 2007 11:31 AM