Panasonic KW-WP1050E - Manual (Page 57)

Getting Started
Helpline Tel. No.: U.K. 0844 844 3898 57
Troubleshooting for installation
If problems occur while installing the base unit, you can refer to the check list below.
For up-to-date support information, visit http://www.panasonic.co.uk. Please refer to it
along with this guide for troubleshooting.
Connection:
Problem Solution
The modem is connected
but the WAN indicator is
off.
L
Check that the modem and this product are connected.
L
Check that the power of the modem and this product
are turned on.
L
It is possible that the Ethernet cable is torn apart. Check
a link lamp of the device that the base unit is connected
to.
The Ethernet is
connected but the LAN
indicator is off. L Check the computer connection.
L
Check that the computer is turned on.
L
Check that the LAN card and driver are installed on the
computer.
L
It is possible that the Ethernet cable is torn apart. Check
a link lamp of the device that the base unit is connected
to.
WP1050E.book Page 57 Thursday, March 29, 2007 11:31 AM