Panasonic KW-WP1050E - Manual (Page 75)

Getting Started
Helpline Tel. No.: U.K. 0844 844 3898 75
Setting the time and date
Set the correct time and date before you start using the handset. The time zone and the
summer time need to be set first before setting the time.
1
{ Menu} (middle soft key)
2
“
Settings
” i {Select}
3
“
Time and Date
” i {Select}
4
Select the desired setting. i {Select}
Note:
L
If you make a mistake when entering the time and date, press {<} or {>} to move the
cursor, then make the correction.
L Changing “
Time zone
” and “
Summer time
” sets the displayed time forward or
backward. When you set the time and date for the first time, set the time after all the
other time and date settings.
L When the time setting is reset to an initial condition by removing the battery or for some
other reasons, the time is displayed as “12:00 AM” or “00:00” and it stops.
Time zone
Select the desired time zone. i {Select}
Summer time
Select “
Standard
” or “
Summer time
”. i {Select}
“
Summer time
” adds 1 hour to the time setting of
“
Standard
”.
Time
Enter the current hour and minute (24-hour clock/12-
hour clock format) by selecting 2 digits for each. For 12-
hour clock, press {*} to select “
AM
” or “
PM
”. i {OK}
Time format
Select “
24 hour clock
” or “
12 hour clock
”. i
{
Select}
The default is set to “
24 hour clock
”.
Date
Enter the current day, month and year by selecting 2
digits for day and month, and 4 digits for year. i {OK}
L
Date can be set from 01/01/2006 to 31/12/2030.
Date format
Select the desired format. i {Select}
WP1050E.book Page 75 Thursday, March 29, 2007 11:31 AM