Panasonic KW-WP1050E - Manual (Page 202)

Base Unit Settings
202 Helpline Tel. No.: U.K. 0844 844 3898
Downloading the version-up firmware to your
computer for recovering the base unit
When the WAN Indicator is flashing in amber, the firmware of the base unit is defective and
the base unit is operating in recovery mode.
Before downloading the firmware for the base unit, you need to set the static IP address
on your computer. For setting the static IP address on your computer, see page 207.
On your computer:
1
On the Web browser, enter http://192.168.102.1
On the base unit:
2
Specify the file name.
You can also click [Browse...] to select the desired file name from the list.
3
Click [Start].
L The base unit automatically restarts after the firmware is updated.
Important:
L
Do not interrupt the firmware updating process by cutting the power supply until the
progress indicator reaches 100% and the base unit restarts itself.
4
Confirm the WAN Indicator is not flashing in amber, then set your computer settings
back to the previous conditions.
WP1050E.book Page 202 Thursday, March 29, 2007 11:31 AM