Series recording connection, Series recording 1, Series recording 2 – Panasonic WJ-DR200 User Manual
Page 15: Auxiliary alarm recording), Series recording 1 (alternate alarm recording)
-13-
●
Series Recording 2
(Alternate Time Lapse Recording)
Connect the terminals on the Terminal Boards of the MASTER and SLAVE Recorder as shown below.
When there is no more recording space on the disc of the MASTER recorder, time lapse recording switches to the
SLAVE recorder. For uninterrupted recording, the disc of the MASTER recorder can be exchanged while recording is
switched to the SLAVE recorder.
(Up to 16 recorders including the MASTER recorder can be connected to record sequentially.)
(Auxiliary Alarm Recording)
An auxiliary record is made on the SLAVE recorder when a second alarm signal is received while the MASTER recorder
is recording. This function is not available while the MASTER recorder is in an operating mode other than Alarm
Recording (playback, search, etc.).
Connect the required video and audio input to both recorders.
For sensor input, connect the SENSOR IN instead of the ALARM IN terminals.
WJ-DR200
MASTER Recorder
SLAVE Recorder
WJ-DR200
GND
SENSOR IN
ALARM IN
ALARM RESET IN
SERIES REC IN
TIME ADJUST IN
GND
ALARM OUT
ALARM RECOVER OUT
ALARM REC
REC
DISC
BUZZER OUT
SYSTEM ERROR OUT
THERMAL ERROR OUT
TIME ADJUST OUT
SERIES REC OUT
LED
MONITOR
GND
SENSOR IN
ALARM IN
ALARM RESET IN
SERIES REC IN
TIME ADJUST IN
GND
ALARM OUT
ALARM RECOVER OUT
ALARM REC
REC
DISC
BUZZER OUT
SYSTEM ERROR OUT
THERMAL ERROR OUT
TIME ADJUST OUT
SERIES REC OUT
LED
MONITOR
Connection for Alternate Time Lapse Recording
■
Series Recording Connection
The WJ-DR200 can be set up for automatic serial recording by connecting a second recorder to its Terminal Board.
●
Series Recording 1 (Alternate Alarm Recording)
Connect the terminals on the Terminal Boards of the MASTER and SLAVE recorder as shown below.
Connect the required video and audio input to both recorders.
This will enable recording alarms alternately on the MASTER and on the SLAVE recorder. When there is no more
recording space on the disc of the MASTER recorder, alarm recording switches to the SLAVE recorder.
WJ-DR200
MASTER Recorder
SLAVE Recorder
WJ-DR200
GND
SENSOR IN
ALARM IN
ALARM RESET IN
SERIES REC IN
TIME ADJUST IN
GND
ALARM OUT
ALARM RECOVER OUT
ALARM REC
REC
DISC
BUZZER OUT
SYSTEM ERROR OUT
THERMAL ERROR OUT
TIME ADJUST OUT
SERIES REC OUT
LED
MONITOR
GND
SENSOR IN
ALARM IN
ALARM RESET IN
SERIES REC IN
TIME ADJUST IN
GND
ALARM OUT
ALARM RECOVER OUT
ALARM REC
REC
DISC
BUZZER OUT
SYSTEM ERROR OUT
THERMAL ERROR OUT
TIME ADJUST OUT
SERIES REC OUT
LED
MONITOR