Panasonic WJ-DR200 - Manual (Page 18)

-16-
■ SET UP Menu
This menu lets you change the setup or register an up
to 8-character password that will allow you access to
the setup menu.
MAIN
SET UP ENABLE
SYSTEM
*
REC MODE MODE1 *
MODE2 *
ALARM RECORD *
SEARCH/PLAY *
SYSTEM INFO *
Panasonic AV Disc Recorder V1.0R00
1. Move the cursor to the SET UP parameter in the
MAIN Menu by pressing the or button.
2. Select ENABLE or PASSWORD by pressing the
or button. The default setting is DISABLE.
3. Select ENABLE for making changes in the setup
menu, or select PASSWORD for registering a pass-
word.
Refer to Password Setup on page 31 for details.
■ System Menu
MAIN
SET UP ENABLE
SYSTEM
*
REC MODE MODE1 *
MODE2 *
ALARM RECORD *
SEARCH/PLAY *
SYSTEM INFO *
Panasonic AV Disc Recorder V1.0R00
Select SYSTEM from the MAIN menu by pressing the
or button, then press the SET button. The SYS-
TEM menu appears on the monitor screen.
As shown below, the SYSTEM menu allows access to 11
items.
SYSTEM
CLOCK * AUG 1.98 0:00
START UP STATUS MANUAL
SERIAL SET UP
*
VIDEO INPUT *
STATUS DISPLAY ON
ALARM DISPLAY ON
DISPLAY POSITION
*
SERIES REC MASTER
SERIES REC OUT CLOSE
↓
DISC LED FUNCTION FULL
BUZZER ON
To select an item or parameter in the SYSTEM menu:
1. Move the cursor to the desired item or parameter by
pressing the or button.
2. Press the or button to select the desired
parameter.
3. Press the SET button to execute the selection or
display a submenu for an item with the (*) mark.
4. Press the SET UP/ESC button to return to the MAIN
menu, if desired.
● Clock Setup
This item lets you set the current time and date.
1. Move the cursor to CLOCK in the SYSTEM menu by
pressing the or button, then press the SET
button to move the cursor to the editing area.
2. Move the cursor to the area you want to edit by
pressing the or button, then select the
month or number by pressing the (+) or (–) button.
Notes:
• Valid years are from 1998 to 2096. Set the last
two digits for the year. For the year 2000, set
“00”.
• Set two digits for the hours (military time).
3. After finishing the setting, press the SET UP/ESC
button to move the cursor to CLOCK.
Note: The date and time are updated when the SET
UP/ESC button is pressed.
● Start Up Status Setup
This item lets you select the start-up mode of the Disc
Recorder when the power is turned on.
1. Move the cursor to the START UP STATUS parame-
ter in the SYSTEM menu by pressing the or
button.