Idle timeout, To set the idle timeout, Defining primary and secondary dns – Palm VII User Manual

Page 227: To enter a primary and secondary dns

Advertising
background image

Chapter 8

Page 219

Note:

If you are not sure, try PPP; if that doesn’t work, ask your

Internet Service Provider or your system administrator for the
correct connection type.

Idle timeout

The Idle timeout setting defines how long your organizer waits before
dropping the connection with your ISP or dial-in server when you
switch out of a TCP/IP application.

To set the Idle timeout:

1. Tap the Idle timeout pick list and select one of the following

options:

Immediate

: Drops the connection to your ISP immediately when

you switch to another application.

1 minute

: Waits one minute for you to open another application

before it drops the connection.

2 minutes

: Waits two minutes.

3 minutes

: Waits three minutes.

Power Off

: Keeps your PPP or SLIP connection until you turn off

your organizer (or until it times out). This option works best
with the Palm Modem accessory.

2. Tap OK.

Defining primary and secondary DNS

The Domain Naming System (DNS) is a mechanism in the Internet for
translating the names of host computers into IP addresses. When you
enter a DNS number (or IP address), you are identifying a specific
server that handles the translation services.

Each IP address has four sections, separated by periods. In the Details
dialog box, you enter each section separately. Each section of an IP
address is made up of a number from 0 to 255; numbers are the only
allowable characters in this field.

Ask your Internet Service Provider or system administrator for the
correct Primary or Secondary DNS IP numbers.

Tip:

Many systems do not require that you enter a DNS. If you are

not sure, leave the DNS field blank.

To enter a primary and secondary DNS:

1. Tap the Query DNS check box to deselect it.

Advertising