Panasonic KX-NT700 - Manual (Page 17)

Unit Overview
Main View
C B
C B
B
C
E
F
A
B
C
D
A Speaker
B Indicators (4 locations)
Indicate the status of the unit.
Off: The unit is in standby mode (i.e., not in use).
Blue, flashing: A call is being received.
Blue, lit: The unit is on a call.
Red, lit: The microphones are muted, or an error
has occurred.
C Built-in Microphones (4 locations)
See page 28.
D USB Port (USB)
Used to connect the unit to a computer and use the
included Conferencing Phone Manager software
(see page 57).
E SD Memory Card Slot
Allows you to insert a compatible SD memory card
and record conversations. See page 26 for more
information about SD memory cards.
F AUDIO IN/OUT Jack
Allows you to connect a compatible Panasonic
Portable Station (PS; see page 41) or a computer
(see page 42).
G
H
I
J
G External Wired MIC Jacks (EXT MIC1, EXT
MIC2)
Allow you to connect an External Wired MIC to the
unit (see page 28). 2 mics can be connected.
H DC Input (DC IN)
Used to connect the unit to an AC outlet using the
included AC adaptor.
I LAN Port (LAN)
Used to connect the unit to an IP network. May also
be used to supply power to the unit using PoE
(Power over Ethernet) when the unit is connected
to a PoE-compatible switching hub or power supply
(see page 22).
J Telephone Jack (LINE)
Used to connect the unit to a telephone network or
PBX.
Document Version 2008/10 Operating Instructions 17
Before Use