Panasonic KX-NT700 - Manual (Page 61)

Issue Possible Cause & Solution Reference
I cannot redial by pressing
[REDIAL/PAUSE]. • The number you are trying to redial is too long.
→ If the dialed number contains too many digits (more than 32
digits for IP calls with IP-PBX connection, more than 128
digits for TEL calls), it cannot be redialed correctly.
—
• You pressed [REDIAL/PAUSE] after you began dialing.
→ If you press [REDIAL/PAUSE] after you begin dialing a
phone number, the button functions as the pause button.
To redial the last number dialed, press [
] then [REDIAL/
PAUSE]. To redial one of the last 10 phone numbers dialed,
press [REDIAL/PAUSE], press [ ] or [ ] to select the
desired phone number, then press [
].
page 32
• You are trying to redial a TEL line call, but the unit is not set to
make TEL calls.
→ Make sure the "Line Selection" setting is set to "IP +
TEL".
page 23
• The "Operation Mode" setting is not the same as when the
original call was made. (For example, you are trying to redial an
IP call made in IP-PBX mode, but the unit is now in peer to peer
mode.)
→ Change the setting.
page 25
I cannot make long distance
calls. • Your telephone service does not allow you to make long
distance calls.
→ Make sure that you have subscribed to your telephone
company's long distance service.
—
• If the unit is connected to a PBX, your extension may not be
configured to make long distance phone calls.
→ Contact the PBX administrator.
—
The unit does not ring when
a call is received. • The ringer is turned off.
→ Press [ ] while a call is being received, or change the
ringer volume setting. page 34
Sound Quality
Issue Possible Cause & Solution Reference
The other party cannot hear
my voice. • The unit is muted.
→ If "Mute" is displayed, press [ ] to turn off the mute
feature.
page 35
• Objects are obstructing the microphone.
→ Do not obstruct the unit or an External Wired MIC during
calls. Keep your hands, as well as common objects such as
folders, cups, and coffee pots away from the unit and the
External Wired MIC during calls.
—
Document Version 2008/10 Operating Instructions 61
Troubleshooting