Using a computer, Connecting a computer, Line selection (ip + pc) – Panasonic KX-NT700 User Manual

Page 42

Advertising
background image

Using a Computer

By connecting the unit to a computer, you can use the
unit’s microphones and speaker for calls made or
received with the computer using your preferred IP
phone software.

Connecting a Computer

Connect the included PC Cable to the [AUDIO IN/
OUT]
jack of the unit (A), and to the microphone jack
(red plug; B) and headphone jack (green plug; C) of
the computer.

A

C

B

Note

The microphone and speaker of the computer
cannot be used while the computer is
connected to the unit.

Line Selection (IP + PC)

1.

Press [MENU].

2.

Press

LINE

.

3.

Select "IP + PC".

When "Line Selection" is set to "IP + PC",
TEL calls cannot be made or received.

4.

Press

SAVE

.

5.

Press [MENU].

Using a Computer

1.

Confirm that "PC" is shown in the upper-right corner
of the display.

You can change the selected line by pressing
the center function button ([F2]).

The IP line is selected.

The PC line is selected.

[F2]

[F2]

If you cannot select "PC", change the "Line
Selection
" setting to "IP + PC" (explained
on this page).

2.

Press [

] to begin using the unit’s microphones

and speaker.

Press [

] again to turn off the microphones

and speaker.

3.

Use the desired computer software to make or
answer a call.

4.

Use the computer to end the call.

5.

Turn off the unit’s microphones and speaker by
pressing [

].

Note

Leave at least 50 cm (about 20 in.) of space
between the unit and the computer.

42

Operating Instructions

Document Version 2008/10

Using a Portable Station (PS) or Computer

Advertising