Panasonic KX-NT700 User Manual
Page 65
Message
Possible Cause & Solution
Reference
Not Found
•
The called party cannot be connected (displayed for IP calls
only).
→
Confirm that you have entered the IP address of the other
party correctly.
→
Try again later.
—
Phonebook
No Items Stored
•
The phonebook contains no entries.
→
You must store entries in the phonebook before you can
make a call from the phonebook.
Phonebook Error
•
An error has occurred.
→
Press [BACK], then erase all phonebook entries using
the "Erase All Phonebook Data" feature.
Call Log Error
•
An error has occurred.
→
Press [BACK], then erase the redial list using the "Erase
All Call Log Data" feature.
Please Wait
•
An SD memory card was inserted.
→
Wait while the unit checks the card.
—
Format Error
•
An error occurred while formatting the SD memory card.
→
Remove the SD memory card and use a different card.
—
Unable To Use
•
The SD memory card is not compatible with the unit.
→
Make sure that you are using a compatible SD memory
card.
→
SDHC, miniSDHC, and microSDHC memory cards are not
compatible with the unit.
•
The SD memory card is not formatted in FAT format.
→
Use a FAT format SD memory card.
•
The selected recording is less than 1 second long.
→
Recordings less than 1 second long cannot be played back.
—
Memory Full
•
The SD memory card cannot be used for recording because it
is full.
→
Erase unneeded recordings.
Write Protected
•
The switch on the side of the SD memory card is in
the "LOCK" position.
→
Remove the card, slide the switch to unlock the card, then
insert the card again.
System Data Err
Clear Data?
•
An error has occurred.
→
Press
YES
to reset all system data and restart the unit.
Press
NO
to restart the unit without resetting any data.
—
No Connection To
Analog Line
•
You tried to make a call immediately after refusing a call.
→
Wait until "TEL" is shown on the display, then make the call.
—
No Connection To SIP
Server
•
The unit’s network settings and/or SIP settings are incorrect.
→
Consult your system administrator.
—
Document Version 2008/10
Operating Instructions
65
Troubleshooting