Panasonic KX-NT700 - Manual (Page 39)

Recording Features
Conversations and voice memos can be recorded to an
SD memory card.
SD Memory Card Information
Confirm the following before recording to an SD
memory card.
– A compatible card is inserted (see page 26)
• When an SD memory card is inserted,
SD
is
shown in the upper-left corner of the display.
– The card has been formatted using the correct
format (see page 27).
– The card is not locked (see page 26).
• If you insert a locked card, "Write
Protected" is displayed.
Note
• No more than 100 recordings can be made,
regardless of the SD memory card capacity.
• When "Memory Full" is displayed, recording
is not possible until other recordings are erased.
If the card becomes full while recording,
recording will stop.
See page 26 for information on approximate
recording time.
• While recording, if the amount of recording time
available is less than 6 minutes, "Remaining
Time Less Than 6 Min." is displayed
briefly, and the display’s backlight flashes until
recording stops. When less than 1 minute is
available, "Remaining Time Less Than 1
Min."is briefly displayed.
• When recording telephone conversations, we
recommend informing the other party that the
conversation is being recorded.
• Be sure to comply with applicable local
regulations (laws, ordinances, guidelines, etc.)
regarding telephone conversation recording.
Recording
Conversations
1. Press
REC
during a conversation.
• "Remaining Time" and the approximate
recording time available are displayed briefly,
then "Conf Recording" and the approximate
length of the call are displayed.
2. To stop recording, press
STOP
.
• Recording stops automatically when [ ] is
pressed.
Recording Voice Memos
Voice memos (i.e., recordings made when you are not
on a call) can also be recorded.
1. Press [MENU] while you are not on a call.
2. Select "Voice Memo", then press
REC
.
• "Remaining Time" and the approximate
recording time available are displayed briefly,
then "Memo Recording" and the approximate
length of the call are displayed.
3. To stop recording, press
STOP
.
• Recording stops automatically when a call is
received.
Playing Back Recordings
1. Press
PLAY
.
2. Press [ ] or [ ] repeatedly to scroll through the
list of recordings, then press
SELECT
.
• Recorded conversations are displayed as
plus the date and time of the recording.
Voice memos are displayed as plus the
date and time of the recording.
3. Press
PLAY
.
• Press [BACK] to stop playback.
• If the selected recording is less than 1 second
long, "Unable To Use" is displayed and the
recording cannot be played back.
4. Press [MENU] to exit.
Note
• Recordings are saved in PCM format and can
be played back on a computer using Windows
Media® Player or QuickTime®. Recordings are
Document Version 2008/10 Operating Instructions 39
Recording
Recording