Panasonic KX-NT700 - Manual (Page 41)

Using a Portable Station
(PS)
By connecting the unit to a PS, you can use the unit’s
microphones and speaker for calls made or received
with the PS.
Compatible Portable Stations (as of July, 2008)
– KX-TD7680 – KX-TD7685
– KX-TD7690 – KX-TD7695
– KX-TD7684 – KX-TD7696
– KX-TD7694
Line Selection (IP + PS)
1. Press [MENU].
2. Press
LINE
.
3. Select "IP + PS".
• When "Line Selection" is set to "IP + PS",
TEL calls cannot be made or received.
4. Press
SAVE
.
5. Press [MENU].
Using a PS
1. Confirm that "PS" is shown in the upper-right corner
of the display.
• You can change the selected line by pressing
the center function button ([F2]).
The IP line is selected. The PS line is selected.
[F2] [F2]
• If you cannot select "PS", change the "Line
Selection" setting to "IP + PS" (explained
on this page).
2. Make or answer a call using the PS.
3. Connect the included PS Cable to the [AUDIO IN/
OUT] jack of the unit (A), and to the headset jack
of the PS.
A
• Make sure the plug of the PS Cable is inserted
fully into the unit and PS, otherwise sound may
not be heard, or echoing and feedback may
occur.
• Place the PS as far away from the unit as
possible.
4. Press [ ] to begin using the unit’s microphones
and speaker.
• Press [ ] again to turn off the microphones
and speaker.
5. Use the PS to end the call.
6. Turn off the unit’s microphones and speaker by
pressing [
].
Note
• For best performance, we recommend setting
the receiver volume of the PS as follows:
– 4-volume level models: level 3
– 6-volume level models: level 4
• For best performance, do not change the
speaker (receiver) volume of the PS frequently
during a call. Echoing or feedback may occur.
• The microphone and receiver of the PS cannot
be used while the PS is connected to the unit.
• This feature will not function when a mobile
phone or incompatible PS is connected to the
unit.
Document Version 2008/10 Operating Instructions 41
Using a Portable Station (PS) or Computer
Using a Portable Station (PS) or Computer