Burst – Panasonic DMC-TS4 User Manual
Page 103
- 103 -
Recording
Applicable modes:
Pictures are taken continuously while the shutter button is pressed.
[Burst]
Settings
Description of settings
[˜]
([Burst On])
Burst speed
approx. 3.7 pictures/second
Number of recordable
pictures
max. 6 pictures
•
Focus, exposure, and White Balance will be fixed to the settings for the
first picture. Depending on changes in the brightness of the subject, the
recording may be brighter or darker from the second picture.
•
The Burst speed (pictures/second) may become slower depending on
the recording environment, such as in dark places, if the ISO sensitivity is
high etc.
[
]
([Hi-Speed Burst])
Burst speed
approx. 10 pictures/second
Number of recordable
pictures
max. 100 pictures
•
This can be set only during Program AE Mode.
•
The picture size is fixed to 3M (4:3), 2.5M (3:2), 2M (16:9) or 2.5M (1:1).
•
The Burst speed changes according to the recording conditions.
•
The number of Burst recording pictures are limited by the picture-taking
conditions and the type and/or status of the card used.
•
The number of Burst recording pictures may increase when you use a
card with fast writing speed or card is formatted.
•
The focus, zoom, exposure, White Balance, shutter speed and ISO
sensitivity are fixed to the settings for the first picture.
•
The ISO sensitivity is automatically adjusted. However, the ISO
sensitivity is increased to make the shutter speed become high-speed.
•
Depending on the operating conditions, it may take time to take the next
picture if you repeat taking a picture.
[
]
([Flash Burst])
Number of recordable
pictures
max. 5 pictures
•
Still pictures are taken continuously with flash.
•
This can be set only during Program AE Mode.
•
The picture size is fixed to 3M (4:3), 2.5M (3:2), 2M (16:9) or 2.5M (1:1).
•
Settings for focus, zoom, exposure, shutter speed, ISO sensitivity, flash
output are fixed to the first picture.
•
Number of recordable pictures will be fixed to 5 pictures when the
self-timer is used.
•
The flash setting is fixed to [
‰
].
[OFF]
j