Adding an altimeter log – Panasonic DMC-TS4 User Manual
Page 125
- 125 -
GPS/Sensor
The altitude is recorded at 15 minute intervals and displayed as a graph.
•
Set the date and time settings in advance.
•
It cannot be recorded into the built-in memory. Please use a card.
Select [Altimeter] on the [GPS/Sensor] menu, and then press [MENU/
SET].
Press
3/4 to select [Logging], and then press [MENU/SET].
Press
3/4 to select [ON], and then press
[MENU/SET].
A Altimeter log 12 hours before
B Latest altimeter log
•
Press [DISP.] several times on the recording standby
screen until the altitude graph display screen
appears. You can view a graph of the altimeter log for
the last 12 hours.
Note
•
In the following cases, altitude is not recorded.
–
When [Airplane Mode] is set to [ON] and the power is turned off
–
When [Sensor Settings] is set to [OFF]
–
[Beach & Snorkeling]
–
[Underwater]
–
When using [Time Lapse Shot]
–
When connecting to a PC or a printer
–
When recording motion pictures.
Adding an altimeter log
The period up to when the [Logging] is set to [OFF] is saved as a single log file.
In the following cases, even if [Logging] is not set to [OFF], the record of the altitude as
a single log file will be interrupted.
•
When the time settings are changed (including [Auto Clock Set])
•
When the [World Time] setting is changed
•
When the battery remaining is [
]
•
When there is insufficient space on the card
A
B