Video divide – Panasonic DMC-TS4 User Manual

Page 146

Advertising
background image

Playback/Editing

- 146 -

Recorded motion picture can be divided in two. It is recommended for when you want to
divide a part you need with a part you do not need.
It cannot be restored once divided.

Note

[Video Divide] may not be performed on motion pictures recorded with other equipment.

Motion pictures cannot be divided at a location close to the start or end of the motion picture.

With [MP4] motion pictures, the order of pictures will change if divided.
It is recommended to search these motion pictures by using [Calendar] or [Video Only] in the
[Filtering Play].

Motion pictures with a short recording time cannot be divided.

[Video Divide]

Select [Video Divide] on the [Playback] menu.

(P46)

Press

2/1 to select the motion picture to divide, and then press

[MENU/SET].

Press

3 at the location to divide.

Motion picture is played back from the same location when

3 is

pressed again.

You can finely adjust the location for division by pressing

2/1

while the motion picture is paused.

Press

4.

Confirmation screen is displayed. It is executed when [Yes] is selected.
Exit the menu after it is executed.

Motion picture may be lost if the card or battery is removed while processing the
dividing.

Advertising