Panasonic DMC-TS4 User Manual
Page 53
- 53 -
Basic
•
The brightness of the pictures displayed on the LCD monitor is increased so some subjects
may appear different from real life on the LCD monitor. However, this does not affect the
recorded pictures.
•
The LCD monitor automatically returns to normal brightness if no operations are preformed for
30 seconds when recording in Power LCD Mode. Press any button to make the LCD monitor
bright again.
•
When [LCD Mode] is set, the usage time is reduced.
•
When you align the subject on the horizontal and vertical guidelines or the cross point of these
lines, you can take pictures with well-designed composition by viewing the size, the slope and
the balance of the subject.
•
The [Pattern] setting is fixed to [
] in the Intelligent Auto Mode.
•
In [Panorama Shot] in Scene Mode, the guideline is not displayed.
[LCD Mode]
These menu settings make it easier to see the LCD monitor when
you are in bright places.
[„] ([Auto Power LCD])
¢
:
The brightness is adjusted automatically depending on how bright
it is around the camera.
[…] ([Power LCD]):
The LCD monitor becomes brighter and easier to see even when
taking pictures outdoors.
[OFF]
¢
Can be set only when Recording Mode is set.
[Guide Line]
Set the pattern of the guidelines displayed when taking pictures.
You can also set whether or not to have the recording information
displayed when the guidelines are displayed.
[Rec. Info.]:
[ON]/[OFF]
[Pattern]:
[
]/[
]
LCD