Sensors (compass/altimeter/barometer) are operated, Sensors (compass/altimeter/barometer), Are operated – Panasonic DMC-TS4 User Manual

Page 121

Advertising
background image

- 121 -

GPS/Sensor

Applicable modes:

Sensors (compass/altimeter/barometer) are
operated

The direction, altitude, and atmospheric pressure can be measured and recorded in the
recorded images.

If compass/altimeter/barometer are operated in the time settings

(P27)

at the time of purchase,

[GPS Setting] will be set to [ON] automatically.

Select [Sensor Settings] on the [GPS/Sensor] menu, and then press
[MENU/SET].

Press

3/4 to select [ON], and then press

[MENU/SET].

Exit the menu after it is set.

To switch the environment information screen, press
[DISP.] several times.

A Compass
B Altimeter
C Latitude
D Longitude
E Time positioning was performed
F Barometer

Note

When [GPS Setting] is set to [OFF], the latitude/longitude and positioning timing are not
displayed.

They keep working when the power is turned off. If you do not wish the compass/altimeter/
barometer to keep working when the power is turned off, set [Airplane Mode] to [ON].

(P131)

For motion pictures

¢

, the direction, altitude and atmospheric pressure measured at the start of

the recording are recorded.
¢ When recording using [MP4] or [GFS]/[GS] in [AVCHD]

B

F

D

C

E

A

Advertising