Panasonic DMC-TS4 - Manual (Page 190)

Others
- 190 -
Message Display
Confirmation messages or error messages will be displayed on the screen in some cases.
The major messages are described below as examples.
[GPS feature is not available in this region.]
• The GPS may not operate in China or close to the Chinese border in neighbouring countries.
(As of December 2011)
[This picture is protected]
> Delete the picture after canceling the protect setting. (P152)
[Some pictures cannot be deleted]/[This picture cannot be deleted]
• Pictures not based on the DCF standard cannot be deleted.
> Format the card after saving necessary data on a PC etc. (P60)
[Cannot be set on this picture]
• [Title Edit], [Text Stamp] or [Print Set] cannot be set for pictures not based on the DCF
standard.
[Built-in memory full]/[Memory card full]/[Not enough space on built-in memory]/
[Not enough memory on the card]
• There is no space left on the built-in memory or the card.
• When you copy pictures from the built-in memory to the card (batch copy), the pictures are
copied until the capacity of the card becomes full.
[Some pictures cannot be copied]/[Copy could not be completed]
• The following pictures cannot be copied.
– When a picture with the same name as the picture to be copied exists in the copy
destination. (Only when copying from a card to the built-in memory.)
– Files not based on the DCF standard.
• Moreover, pictures recorded or edited by other equipment may not be copied.
[Built-In Memory Error]/[Format built-in memory?]
• This message will be displayed when you formatted the built-in memory on a PC.
> Format the built-in memory on the camera again. (P60) The data on the built-in memory
will be deleted.