Panasonic DMC-TS4 - Manual (Page 94)

Recording
- 94 -
Applicable modes:
This allows the sensitivity to light (ISO sensitivity) to be set. Setting to a higher number
enables pictures to be taken even in dark places without the resulting pictures coming out
dark.
∫ About [ ] (Intelligent ISO sensitivity control)
The camera detects movement of the subject and then automatically sets the optimum ISO
sensitivity and shutter speed to suit the movement of the subject and brightness of the
scene to minimize the jitter of the subject.
•
The shutter speed is not fixed when the shutter button is pressed halfway. It is continuously
changing to match the movement of the subject until the shutter button is pressed fully.
Note
• For the focus range of flash when [AUTO] is set, refer to P66 .
• You cannot select [AUTO] or [ ] in Manual Exposure Mode.
• The ISO sensitivity is automatically set under the following conditions.
– When [Burst] in the [Rec] menu is set to [ ] or [ ]
– When recording motion pictures
[Sensitivity]
Settings Description of settings
[AUTO]
The ISO sensitivity is automatically adjusted according to the brightness.
• Maximum [400] (With the flash on [1600])
[ ]
([i.ISO])
The ISO sensitivity is adjusted according to the movement of the subject
and the brightness.
• Maximum [1600]
[100]
The ISO sensitivity is fixed to various settings.
[200]
[400]
[800]
[1600]
[100] [1600]
Recording location
(recommended)
When it is light (outdoors) When it is dark
Shutter speed Slow Fast
Noise Less Increased
Jitter of the subject Increased Less