P59) – Panasonic DMC-TS4 User Manual
Page 59
- 59 -
Basic
•
This will work when the HDMI micro cable (optional) is connected.
•
for details.
•
This will work when the
HDMI
micro
cable (optional)
is connected.
•
for the method to play back 3D pictures in 3D.
•
for information about how to play back pictures.
•
When you play back pictures on a PC, they cannot be displayed in the rotated direction unless
the OS or software is compatible with Exif. Exif is a file format for still pictures which allows
recording information, etc. to be added. It was established by “JEITA (Japan Electronics and
Information Technology Industries Association)”.
•
It may not be possible to rotate pictures that have been recorded with other equipment.
•
The display is not rotated during Multi Playback.
[VIERA Link]
Setup so this unit can be controlled by the remote control of the
VIERA by automatically coupling this unit with the VIERA Link
compatible equipment using HDMI micro cable (optional).
[ON]:
Remote control operation of the VIERA Link compatible
equipment is enabled. (Not all operations are possible)
Button operation of the main unit will be limited.
[OFF]:
Operation is performed with the buttons on this unit.
[3D Playback]
Setup the output method for 3D pictures.
[
]:
Set when connecting to a 3D compatible television.
[
]:
Set when connecting to a television not compatible with 3D.
Set this when you would like to view pictures in 2D
(conventional image) on a 3D compatible television.
M [Rotate Disp.]
This mode allows you to display pictures vertically if they were
recorded holding the camera vertically.
[
] ([On]):
Rotate pictures on a TV and the LCD display so that they are
displayed vertically.
[
] ([External Only]):
Rotate only the picture on a TV so that it is displayed vertically.
[OFF]