Pentair EasyTouch Pool/Spa Control System LX-100EZ - Manual (Page 25)

Rev. F 3-26-04 25 P/N 520050
MOTORIZED VALVES
Your control system is designed to activate two motorized valves, which automatically rotate between pool and spa
circulation whenever Push-button #1 (SPA) is activated by the Hand-held Remote. These valves are also activated
from the “FILL” and “DRAIN” positions of the SPA Service Switch at the LX-100 RF Power/Load Center.
An additional motorized valve may have been installed for a custom hydraulic application, such as a fountain or
waterfall, or (in lieu of a booster pump) to activate your pool cleaner.
A toggle switch is located on the rear of each Valve Actuator. This switch is used by the Pool Builder to set the
correct valve rotation direction.
DO NOT ADJUST THIS SWITCH POSITION.