Precor Low Impact 9.31 - Manual (Page 17)

Owner’s Manual: Display Console 15
The center display shows the following information. This
information is shown in alphabetic order.
CALORIES—displays the estimated cumulative number of
calories burned. The calorie calculation is derived from the
speed, incline, and your weight. An accurate weight entry
results in a more accurate calorie count. When using
QUICKSTART and a weight has not been specified, the
default weight is 150 pounds (68 kilograms).
DISTANCE—shows a linear distance in either miles or
kilometers. The distance is calculated based on your speed.
HEART RATE—displays your heart rate. If you are wearing
the chest strap, the display shows your heart rate when the
LED is lit.
The heart rate LED lights if the heart rate receiver is installed
in the display console, otherwise the feature is skipped. If
you wish to purchase the heart rate option, refer to Obtaining
Service.
INCLINE—displays the percentage of incline during your
workout. The INCLINE
▼ or ▲ keys affect the lift and let you
set an incline between 0% and 15%. The values displayed
can change in 0.5% increments.
PROFILE—appears on the display and corresponds to the
program you selected. As you continue your workout, a
blinking column indicates your position in the program.
Changes in incline affect the column height as shown in
Diagram 6.
If the profile is only one row high, then markers ( )
appear occasionally and provide a sense of movement
through the program.
SPEED—displays the running belt speed in miles per hour
(mph) or kilometers per hour (kph). The running belt speed
ranges from 0.5 to 11 mph (1 to 18 kph) and can be
changed in 0.1 increments using the SPEED
▼▲ keys.