Precor Low Impact 9.31 - Manual (Page 19)

Owner’s Manual: Display Console 17
Keypad
Use the keypad to enter your workout session selections.
Keys on the keypad respond to the slightest touch. Use
gentle pressure on the keys as you exercise.
INCLINE ▲▼:
Press and hold the INCLINE arrows to increase or
decrease the incline from 0% to 15% in 0.5%
increments.
During your workout, to view your current incline, tap
either INCLINE
▲ or ▼ key. To change the incline,
press the arrow key for more than one second.
Changes to the incline are not immediate. It takes
time for the lift to reach the target incline shown on
the display.
The incline setting affects the column height in the
program profile as shown in Diagram 6.
The height of the column indicates the level of incline.
Every time the incline changes by four sequential
levels (up or down) the height of the column changes
by one row.
Diagram 6: Column height affected by changes in incline
Note: During the setup phase, pressing the INCLINE
arrow keys will not affect the incline. However, the arrow
keys do affect what appears on the display. Refer to
Selecting a Program.
STOP
0 to 2.5
3 to 4.5
5 to 6.5
7 to 8.5
9 to 10.5
11 to 12.5
13 to 15
Column height Incline Setting